Showing posts with label new wheels. Show all posts
Showing posts with label new wheels. Show all posts

Sunday, May 6, 2012

Vintage Wheels Part Deux

When I left off with the new vintage wheels, I was ready to go ride them. I was excited at the prospect of riding tubulars on the road (which I've never done in 20+ years of riding on the road!)

I decided to go check them over and look over my gluing job. I was neat when I did the job, and so there really was not a lot of mess when done. Everything looked pretty good. I did the typical push on the sidewall test to check the strength of my gluing job and got a suprise..... The tire rolled right off.

Huge dissappointment! I looked over the job, and the tires were glued well in the 'valley' of the rim, but nothing out near the braking track. Desparate, I wicked more glue into the edges and put a 'come-a-long' strap around the tire/wheel combo and pressed the tire into the glue with all the force I could muster.

After leaving that setup for a week, I pulled off my impromptu clamp and gave her a try. After pumping up the tire to 100psi, it peeled right back up. Nothing was going to hold that tire in place.

I've since decided that Vittoria's design of pre-sealing the basetape with glue is a good and bad idea. Probably very good when the tires are fresh and the glue is pliable. However, over time, it appears that it begins to shrink a bit. The result is a sharp, pronounced Vee shape of the base tape.

I peeled the tires off and threw them in the trash.

That was a month or so ago.

This weekend, I went by my secret stash of tubulars and found a nice set of 23mm Continental Sprinters. They were/are in excellent shape and feel very pliable.

I opted this time to use Tufo tape. Its expensive, and according to the 'SlowTwitch' guys, it actually slows you down through 'hysterisis'. I don't know about this last claim, but I'm not exactly a fast dude, nor will I be racing crits or other races on this bike. I just train and have fun on it.

Frankly, as for installation, I'm totally sold on the Tufo tape. With as little time as I have these days, the quick installation was totally worth it! I'll ride it this week and will have to ring back later with impressions on how it performs in the short and long term.

Oh yeah... the weight weenie in me came out as I finished up the install - 36 spoke tubular wheels and an ancient Shimano 600 freewheel, and the bike weighs 19.98 pounds. Not bad for some vintage steel!

Monday, October 10, 2011

New Wheels For Kurt

My buddy Kurt has been increasing his skills, and rewarded himself for that with a nice set of wheels. Unfortunately, while the King hubs are tough as nails, the Mavic rims that were on the wheels are less than tough, and were not up to his abuse.....

So, he decided to have them rebuilt. The rebuild job came to my garage for lacing.

I started by tearing down the old wheelset and polishing up the hubs. Getting the cassette off was pretty tough as it was a lower end SRAM and had cut into the alu freehub body. Judicious tapping in the right direction with a brass hammer dislodged it and allowed me to wiggle it off. He'll be replacing it with a higher end cassette that has an alu spider.

The new hoops are Stans and really look good. He picked DTSwiss double butted black spokes along with black annodized nipples. I used spoke lube from Alchemy bicycle works on the threads and laced them up. Lacing went fine, and tensioning up and truing was quick as well. Overall, a very good wheelbuild.

They look to me like they will hold up really well and their tubeless capability will take some weight off his bike.

Friday, July 3, 2009

Cyclocross wheel score!!!!

Last week, a local guy posted a set of Bontrager wheels on the MSTA website for sale forum. The price was great, so I shot him a note and we made arrangements to meet.


I picked up the wheels, and they're pretty cool. They're Bontrage Race-Lites and I picked them up for a song. The rear even had a 9sp cassette on it.

With the blue annodizing on the rims, and the paired spoke setup, they are the schizzle!


Mounted them up on the bike and I'm pretty happy with them. They're lighter than the junkers they replaced as well.